Skip to content , Skip to navigation


ELECTRO-CONDUCTIVE GARMENTS


These Electro-Conducive Garments are made with high quality silver yarn in order to conduct better than other similar materials in this field. They are intended for use with electrical stimulators for pain relief, swelling reduction, increasing blood circulation or sports injury treatment. They are washable and can stretch to fit most patients. Compatible with most TENS and Muscle Stimulation devices.

 Electro-conductive garments - knee        

KNEECAPS

The conductive kneecap garment is used for treatment of sports injury or post-operative swelling. It can relief knee pain and helps reduce swelling of the leg.

Connector: 3.5 mm Snap + 2mm Socket
Composition: 76% Nylon
8% Span dex
16% Silver Yarn

•    HC-882A (S)    Size: 27cm x 10cm +- 1cm     
•    HC-882A (M)    Size: 27cm x 14cm +- 1cm   


 


       Electro-conductive garments - sock

SOCKS

The conductive sock provides stimulation to the entire foot and ankle to increase blood circulation, reduce swelling and relieve pain.

Connector: 3.5 mm Snap + 2mm Socket
Composition: 76% Nylon
8% Span dex
16% Silver Yarn

•    HC-883A (Universal) Size:33cm x 9cm +-1cm   



 

GLOVES

The conductive gloves are excellent for use in treatment of Carpal Tunnel Syndrome, arthritic pain and post-operative swelling reduction.

Connector: 3.5 mm Snap + 2mm Socket
Composition: 76% Nylon
8% Span dex
16% Silver Yarn

•    HC-886A (S)     Size: 18cm +- 1cm               
•    HC-884A (M)     Size: 21cm +- 1cm              
•    HC-885A (L)     Size: 24x10.3cm +- 1cm   

 


Instructions for application
(1) Apply the garment to unbroken skin. Thoroughly cleanse application site to remove any lotions,dirt, etc. Remove jewelry from area that will be covered by garment.
(2) Remove garment from plastic/poly bag and fit to the area of the body to be treated. Ensure the garment fits securely and smoothly, leaving no creases or wrinkles in the garment. Avoid stretching the garment too much.
(3) Attach the lead wire to the stimulator (read stimulator instruction manual for further details).
(4) If using one garment, it is necessary to use a reference electrode. To complete the circuit it is recommended to use a self adhesive electrode, that has a minimum size of 9cm x 5cm. (It is important that you do not use smaller sized electrodes, as this may cause adverse reaction during the Treatment). this electrode should be placed in close proximity to the garment. But must not touch the garment.
(5) Make sure that the stimulator is turned off prior to wearing or removing the garment.

Product Life
(1) The life of the product is a direct result of the use, care and storage of the item. The garment must not be used if torn or damaged and high stimulation widths are needed.

Storage
(1) Always return the garment to the plastic/poly bag provided, after use. Do not leave in humid conditions and store in a dry safe area.

Warning
(1) The garment is not sterile.
(2) Keep the control unit dry and away from source of heat.
(3) Never connect to high frequency surgical device.
(4) The long-term effects of stimulation have not been established.
(5) This device is for short term use only.
(6) Do not apply to broken skin. Should skin rash occur, discontinue use and contact your physician.
(7) Do not use the garment for electro-stimulation in suspected or known cases of any muscle disorder, have or had epilepsy, persons with pacemaker implant or pregnancy.
(8) The stimulator and connecting lead wires used with this garment must be in compliance with the related standards